Loading The Stored Settings - NVision Multi Chemistry 50W Mode D'emploi

PROGRAM SELECT
SAVE DATA
BATT TYPE
LIPO
Use the - or + keys to select the memory slot you wish to modify, then press START. Use the START
key to select the different settings and the - or + keys to modify them.
LIPO CHARGE
C=5000MAH
Once you have made the changes, press and hold the START key for three seconds. The screen will
now display the various charge and discharge settings for the selected battery type. Please refer to
the previous setup instructions for more information.
Once you have made all the changes, press and hold the START key for three seconds to save
the changes to the actual memory slot.
To load memorized settings, use the STOP or - keys to select the load data screen and then press
the START key.
PROGRAM SELECT
LOAD DATA
LiPo CHARGE
C=5000mAh
Use the - or + keys to select the memory slot you wish to load, then press and hold START for three
seconds. After three seconds the charge screen is displayed automatically.
20
Enter > BATT MEMORY 1
USER SET
6S
2.5A

Loading the stored settings

Enter > BATT MEMORY 1
6S
2.5A
Enter >
Enter >
nVision Multi Chemistry High-End Charger