Modifying The Charger's Default Settings - NVision Multi Chemistry 50W Mode D'emploi

Capacity Cut-Off
ON 5000mAh
Safety Timer
ON 120min
Ext. Temp 40C
IN Power Voltage
16.49V
The charger's default settings can be modified. Only modify these settings if you understand their
purpose. To modify the settings, use the STOP or - keys to select the program screen and then press
the START key.
PROGRAM SELECT
User set- >
Precharge Time
OFF
From here on you have to use the - and + keys and the START key to select and modify the
settings.
www.nvisionweb.net
Indicates capacity safety feature setting
Indicates timer safety feature setting
Indicates the temperature measured by the probe
Indicates actual power supply voltage

Modifying the charger's default settings

1min
17