Ga.Ma Salon Exclusive PRO POWER 10-GH Mode D'emploi page 14

Les langues disponibles

CHARGING PROCESS:

Before charging the hair clipper for the first time we recommend fully discharging the battery and then fully

charging it.

1. Make sure that the appliance is switched off.

2. Plug the adapter into the power outlet and then connect it to the device. The charging LED will light up and

remain blue for the whole charging process.The charging base can also be used to charge the device and,

therefore, the adapter plug must be installed directly on the base. When charging is complete, the will LED

go off. Attention: to prolong battery life, the first charge should be much longer even if the LED is off.

The first charge takes 12 hours. Subsequent charges take about 90 minutes. When fully charged, the battery

will last about 90 minutes.

3. Disconnect the adapter from the outlet once the device is fully charged.

4. The hair clipper may be used connected directly to the power outlet if the battery charge is depleted.

The duration of the battery varies based on usage frequency and times. To increase the lifespan of the

batteries, this procedure should be carried out at least twice every 12 months, discharging the battery

completely and recharging it for the maximum time. If the appliance is not used often, remember in any case

to carry out a charging cycle every so often during the year to keep it working efficiently. On the contrary,

when the charging is finished, do not keep the appliance connected to the mains to prevent the battery from

overcharging and damaging the appliance.

WARNING: Do not attempt to replace the internal battery of the hair clipper. This can lead to the risk

of fire or electric shock. Tampering invalidates the warranty on the product.

CAUTION:

Lubricate the blade before the first use. Read the instructions contained in the section "HOW AND WHEN TO

LUBRICATE THE BLADE"

USE INSTRUCTIONS:

• Insert the desired attachment. This operation should always be done with the hair clipper turned off.

• Turn on the hair clipper by pressing the

button.

• Turn off the hair clipper by pressing the

button.