ASSEMBLY INSTRUCTIONS
1. Attach stand base (B) to stand frame (A) by
inserting 4 bolts (AA) from the bottom through
corresponding predrilled holes in the stand
base (B) and stand frame (A) and securing
with 4 nuts.Tighten securely with wrench
provided (CC).
Hardware Used
AA
M5 X 30mm
Bolt
BB
M5 Nut
CC
M5 Wrench
2. Hang the poker (C), tongs (D), brush (E),
and shovel (F) on the stand as illustrated.
CARE AND MAINTENANCE
• Wipe the tools and stand with a soft cloth.
• Do not use abrasive cleaners as they may cause parts to tarnish or rust.
• Store in a clean, dry place.
1-YEAR LIMITED FRAME WARRANTY
If within one year from the date of original purchase, this item fails due to a defect in material or
workmanship, we will replace or repair at our option, free of charge. To order parts or to obtain war-
ranty service, call 1-877-447-4786, Monday - Friday, 8:30 a.m. - 4:30 p.m. CST. This warranty does
not cover defects resulting from improper or abnormal use, misuse, accident, or alteration.
Failure to follow all instructions in the owner's manual will also void this warrranty. The
manufacturer will not be liable for incidental or consequential damages, or common erosion of out-
door products. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation may not apply to you. This warranty gives you spe-
cific legal rights, and you may also have other rights which vary from state to state.
GHP Group Inc.
6440 W. Howard St.
Niles, IL 60714-3302
877-447-4768
1
BB
x 4
AA
x 4
2
x 1
4
A
B
C
D
E
F