Publicité
Les langues disponibles
Les langues disponibles
Setting the Temperature Control
Your unit has one control for regulating the temperature. The temperature control is located
on the outside of the refrigerator compartment door.
The default temperature is displayed in Fahrenheit when the unit is first powered on.
Press and hold the "MODE" button 5 seconds, to switch between °C and °F. Other
buttons use the same method to switch between two modes.
Set temperature range: Celsius degree mode
1.Fridge temperature range: 0~6℃ (Default value 3℃)
2.Freezer temperature range: -23~-15℃ (Default value -19℃)
Set temperature range: Fahrenheit degree mode
1. Fridge temperature range: 32~43°F (Default value 38°F)
2. Freezer temperature range: -10~5°F (Default value -2°F)
• The first time you turn the unit on, the unit will start at the factory-set default
temperature, which is 38°F or 3°C in the refrigerator compartment and -2°F or -19°Cin
the freezer compartment.
• The first time you turn the unit on, adjust the temperature in the refrigerator
compartment to 34ºF and run for at least 4 hours before placing food inside. This will
ensure that the freezer compartment is thoroughly chilled and the refrigerator
compartment is stabilized before food is placed inside. Then adjust the temperature
setting to your desired setting.
• To adjust the temperature in each zone, press the appropriate zone button, and the selected zone will flash
on and off. The temperature will change according to the pre-set temperatures as shown below. You will
hear a bell chime with each press of the control panel buttons.
Child Lock Mode
The CONTROL PANEL LOCK is designed to prevent any changes to the settings to the refrigerator
To enable the CHILD LOCK, press the LOCK button, the CHILD LOCK icon will turn on.
The control panel will be locked until unlocked at the control panel or there is a loss of power.
To disable the CHILD LOCK, press and hold the lock button for approximately 3 seconds until the LOCK icon
turns off and the control panel is working in normal operation mode.
Stanby Mode
The CONTROL PANEL will go dark after approximately 20 seconds if no input has been made.
To reactivate the display, simply press any of the buttons on the control panel.
Temperature Control
MFF180WFD | MFF180SSFD
5
.
Publicité
