BGS technic 7729 Mode D'emploi page 3

CONTENT
1 Twin head (2-legged puller)
2 Triple head (3-legged puller)
3 100 mm leg
4 150 mm leg
5 200 mm leg
6 Cross head
7 Hydraulic ram
8 Threaded sleeve
9 Main shaft
10 Separator 14 – 62 mm
11 Extension rod
12 Plunger
SAFETY ADVICE
•
The following safety precautions are necessary because breaking and hurling
pieces of the pulled components can lead to serious injuries. Always wear
safety goggles gloves!
•
Before carrying out the pulling operation, check the ram for a centered position
so that its legs and the separator cannot slip off.
•
Do not grip between the puller arms or in the pullers.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
10 ton Hydraulic Puller Set
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
Art. 7729
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed