Fm Radio Mode - Numan Two Mode D'emploi

FM radio mode receives analogue radio from the FM band and displays RDS (Radio Data
System) information about the station and show (where broadcast). To enter FM mode,
either press Mode until the display shows FM Radio or select:
SELECTING STATIONS
• Automatic
To find a station, press Select . The frequency display starts to run up as the radio scans the FM band.
• Manually:
Alternatively, you can scan up or down by pressing and holding the
quick presses, or by turning the Select control.
STORING FM PRESETS
To store an FM preset, press and hold Preset until the display shows the Save preset screen. Select one of the
20 presets to save the currently playing station.
To select a preset, press Preset briefly, then select one of the listed Preset stations. When a preset station is
playing, it shows (*1, *2 etc) in the bottom right of the screen.

FM RADIO MODE

82
MENU > Main menu >
or buttons or tune manually with
FM.