ebi Cascade Guide D'utilisateur page 7

How to clean the carbon filter
Remove the feeder cover, take
out the filter and clean it.
What to do when the water pump makes an unusual amount of noise
Water level
Max
Min
Before first use, rinse the filter
under the running water. Do
not use soap or detergent.
www.ebi.eu
Insert the filter into the water
bowl as per shown direction.
When there is any abnormality
or noise, take out the wire
holder and remove the power
head. Check the impeller and
clean the power head, then
reassamble the power head
into the water bowl.
While using, fill the water
feeder with water as per the
water level. (Max and Min). The
min water level should not be
under the power head. Low
water level can cause damage
to the power head.
5
EN