Find Quality Products Online at:
4. MAINTENANCE
Except for the batteries, the instrument contains no parts that can be
replaced by personnel who have not been specially trained and accredited.
Any unauthorized repair or replacement of a part by an "equivalent" may
gravely impair safety.
4.1. CLEANING
The device must be kept perfectly clean.
Disconnect the instrument completely.
Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and dry
rapidly with a dry cloth or forced air. Do not use alcohol, solvents, or hydrocarbons.
4.2. REPLACEMENT OF BATTERIES
Any handling of the battery compartment cover must take place on a clean device
and in a clean environment.
If, during the self-test, only half of the indicators light, you must replace the batteries.
Disconnect anything connected to the device.
Using a screwdriver, unscrew the two captive screws of the battery compartment
cover located on the back of the device.
Withdraw the spent batteries and replace them with two new batteries (AA or LR6
1.5V alkaline batteries).
Close the battery compartment cover and make sure that it is completely and
correctly closed.
Screw the two screws back in.
Spent batteries must not be treated as ordinary household waste. Take
them to the appropriate recycling collection point.
4.3. METROLOGICAL CHECK
Like all measuring or testing devices, the instrument must be checked
regularly.
This instrument should be checked at least once a year. For checking and calibration,
contact one of our accredited metrology laboratories (information and contact details
available on request), at our Chauvin Arnoux subsidiary or the branch in your country.
4.4. REPAIR
For all repairs before or after expiry of warranty, please return the device to your
distributor.
GlobalTestSupply
www.
38
.com
sales@GlobalTestSupply.com