Geutebruck GeViScope-HS/R Manuel De Service page 46

Good to know...
On machines with a BIOS password, you will be asked to enter it before the start of the BIOS setup
(after pressing F2):
Go to the BOOT menu.
Switch the setting marked in BLUE to DISABLE.
Take the CD/DVD out of the drive.
Go to the menu. Select the entry
EXIT
TIP: During the BIOS setup, no language-specific keyboard is loaded. The English keyboard layout is used.
On a German QWERTZ keyboard, you need to press 'Z' for 'Y'. The N is the same for both keyboards.
The BIOS is reset and the machine reboots.
20
Changes. Confirm with 'Y'.
Exit Saving