Bellman & Symfon BE1441 Manuel D'utilisation page 13

Operating conditions
Operate the device in a dry environment within the temperature and humidity limits stated in
this booklet. If the device gets wet or is exposed to moisture, it should no longer be regarded as
reliable and should therefore be replaced.
Cleaning
Disconnect all cables before you clean your device. Use a soft, lint-free cloth. Avoid getting mois-
ture in openings. Do not use household cleaners, aerosol sprays, solvents, alcohol, ammonia or
abrasives. This device does not require sterilization.
Service and support
If the device appears to be damaged or doesn't function properly, follow the instructions in this
booklet. If the product still doesn't function as intended, contact your local hearing care
professional for information on service and warranty.
Warranty conditions
Bellman & Symfon guarantees this product for two (2) years from date of purchase against any
defects that are due to faulty materials or workmanship.
This guarantee only applies to normal conditions of use and service, and does not include damage
resulting from accident, neglect, misuse, unauthorized dismantling, or contamination howsoever
caused. This guarantee excludes incidental and consequential damage. Furthermore, the warranty
does not cover Acts of God, such as fire, flood, hurricanes and tornadoes.
This warranty gives you specific legal rights and you may also have other rights that vary with
territory. Some countries or jurisdictions do not allow the limitation or exclusion of incidental
or consequential damages, or limitations on how long an implied warranty lasts, so the above
limitation may not apply to you. This guarantee is in addition to your statutory rights as a
consumer. The above warranty may not be altered except in writing signed by both parties hereto.
Configuration options
This BE1441 and BE1442 Visit flash receiver can be configured with the following Visit transmitters
and Bellman & Symfon original accessories:
Compatible Visit transmitters
 BE1411 Visit door transmitter
 BE1420 Visit pushbutton transmitter
BE1431 Visit telephone transmitter

 BE1433 Visit mobile phone transceiver
 BE1481 Visit smoke alarm transmitter
BE1551 Visit smoke alarm transmitter

 BE1555 Visit CO alarm transmitter
 BE1491 Visit baby monitor
For detailed product information, see the corresponding user manual.
24
Available accessories
 BE9075 Wall mount bracket
 BE1270 Bed shaker
BE9105 Telephone cable

 BE9250 Mobile phone sensor
ISO Certification of legal manufacturer
Bellman is certified in accordance with SS-EN ISO 9001 and SS-EN ISO 13485.
SS-EN ISO 9001 Certification Number: CN19/42071
SS-EN ISO 13485 Certification Number: CN19/42070
Certification Body
SGS United Kingdom Ltd
Rossmore Business Park Ellesmere Port Cheshire CH65 3EN UK
Regulatory symbols
With this symbol, Bellman & Symfon confirms that the product meets the Medical Device Regulation EU
2017/745.
This symbol indicates the manufacturer's serial number so that a specific medical device can be identi-
fied. It's available on the product and gift box.
This symbol indicates the manufacturer's catalogue number so that the medical device can be identified.
It's available on the product and gift box.
This symbol indicates the medical device manufacturer, as defined in EU Directives 90/385/EEC, 93/42/
EEC and 98/79/EC.
This symbol indicates that the user should consult the instructions for use.
This symbol indicates that it is important for the user to pay attention to the relevant warning notices in
the user guide.
This symbol indicates important information for handling and product safety.
Temperature during transport and storage: –10° to 50° C, 14° to 122° F
Temperature during operation: 0° to 35° C, 32° to 95° F
Humidity during transportation and storage: <90%, non-condensing
Humidity during operation: 15% to 90%, non-condensing
Atmospheric pressure during operation, transportation and storage: 700hpa to 1060hpa
This device is designed such that it functions without problems or restrictions if used as intended, unless
Operating
conditions otherwise noted in the instructions for use.
With this CE symbol, Bellman & Symfon confirms that the product meets EU standards for health, safety,
and environmental protection as well as the Radio Equipment Directive 2014/53/EU.
This symbol indicates that the product shall not be treated as household waste. Please hand over your
old or unused product to the applicable collection point for the recycling of electrical and electronic
equipment or bring your old product to your hearing care professional for appropriate disposal. By
ensuring this product is disposed of correctly, you will help prevent potential negative effects on the
environment and human health.
EN
25