Publicité
Les langues disponibles
Les langues disponibles
BATTERY INSTALLATION & REPLACEMENT
1
10
BATTERY
PLASTIC CAP
BATTERY SEAT
38
WIRE INSERTING HOLE
Remove the Meter (No. 10) from Main Frame (No. 1). Then disconnect the link wire of Inductor (No.
38) with the Meter (No. 10).
Remove the plastic cap from the back of Meter (No. 10).
Insert the battery using your fingers. Ensure that the positive side of the battery which is labeled with a
+ sign is facing upward once the battery is in place.
Put the plastic cap onto the battery seat.
Insert the link wire of Inductor (No. 38) into the hole on the back of Meter (No. 10).
Attach the Meter (No. 10) onto Main Frame (No. 1).
The replacement is complete!
NOTE: Dispose battery according to your state and regional guidelines.
Version: 3.3
11
Publicité
