Mvac M85 Manuel D'instructions page 8

MUFFLER INSTALLATION (OPTIONAL)
OPTION 1
OPTION 2
1. Insert a rubber coupling (A) on the vacuum air exhaust (D).
2. Using a Phillips screwdriver, tighten the clamp collar to ensure adequate
sealing.
3. Insert a 90° elbow (B) into the rubber coupling, and tighten the clamp collar
as per instructions in step 2.
4. Apply ABS glue to the 90° elbow and insert muffler (C).
C
D
6
1. Apply ABS glue to the vacuum air
exhaust, on top of the unit.
2. Insert muffler.
B
A
Installation
A. Rubber coupling
B. 90° elbow
C. Muffler
D. Air exhaust