PROMAT 4000877174 Mode D'emploi Original page 11

Operation
Charging the Battery
Use the USB charging cable supplied to connect the charging socket (4) under the
slidable cover to a suitable USB port.
During charging the charge indicator light (3) lights up red. After charging has
ended, the charge indicator light lights up green.
After charging has finished, disconnect the light from the charging cable.
Use
Press the ON/OFF button (5) once to switch on the light with full output (110 lm).
Press the ON/OFF button again to reduce the output (55 lm). Pressing the ON/OFF
button once again minimises the output (10 lm). Press the ON/OFF button once
again to switch off the light.
You can focus the light beam as you wish by pushing the lamp head (1) forwards
and backwards.
You can use the magnetic base integrated into the ON/OFF button to attach the
light to magnetic surfaces so that both your hands are free.
Maintenance and Storing
Do not use aggressive chemicals, solvents or abrasives to clean the torch. Do not
allow liquids of any kind to enter the torch or immerse the torch in liquids of any
kind.
Store the torch in a place away from direct sunlight, dust, humidity, extreme
temperatures and vibrations and out of the reach of children.
7