Silverline 631977 Mode D'emploi page 4

GB
Description of Symbols
The rating plate on your tool may show symbols. These represent important
information about the product or instructions on
its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction Manual.
Contains lead acid battery!
Class III construction
(separated or safety extra-low voltage)
Charger: Class II construction
(double insulated for additional protection)
Conforms to relevant legislation and safety standards
Environmental Protection
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authority or retailer for recycling advice.
4
Original Instructions
Specification
Lamp type: .................................................................Halogen
Luminous intensity: ......................... One million candle power
White LED power: ...............................................................2W
Red LED power: ...............................................................0.6W
Battery type: ................................................................ 6V, 4Ah
Charging time (230V): ................................................. 8-10hrs
Charging time (12V): ..................................................... 5-8hrs
As part of our ongoing product development,
specifications of Silverline products may alter without notice.
General Safety
WARNING Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire and/
or serious injury.
WARNING: This device is not intended for use by persons (including
children) with reduced, physical or mental capabilities or lack of
experience or knowledge unless they have been given supervision or
instruction concerning use of the device by a person responsible for
their safety. Children must be supervised to ensure that they do not play
with the device. Save all warnings and instructions for
future reference.
Work area safety
a) Do not operate electrical devices in explosive atmospheres, such
as in the presence of flammable liquids, gases or dust. Electrical
devices create sparks which may ignite the dust or fumes.
Electrical safety
a) Electrical plugs must match the outlet. Never modify the plug in
any way. Do not use any adapter plugs with earthed (grounded)
devices. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c) Do not expose non-waterproof electrical devices to rain or wet
conditions. Do not submerge non-pressure-rated devices in water.
Water entering an electrical device will increase the risk of electric
shock.
d) Do not abuse the power lead. Never use the lead for carrying,
pulling or unplugging the device. Keep lead away from heat, oil,
sharp edges or moving parts. Damaged or entangled power leads
increase the risk of electric shock.
e) If operating an electrical device in a damp location is unavoidable,
use a residual current device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
Personal safety
a) Stay alert, watch what you are doing and use common sense
when operating an electrical device. Do not use potentially
dangerous electrical devices while you are tired or under the
influence of drugs, alcohol or medication. A moment of inattention
while operating potentially dangerous devices may result in serious
personal injury.
b) Use personal protective equipment including eye protection where
appropriate. Protective equipment used for appropriate conditions will
reduce personal injuries.