Setting Up; Connecting The Cables - Medion MD 90161 Mode D'emploi

Setting up

Connecting the cables

Connect the external hard disk to your computer using a free USB
port. You can also connect the hard disk to computers with a USB 1.1
port however the speed of transmission will be slower.
1. Start your computer and wait until Windows
loaded.
2. Connect the mini-USB connector of the supplied Y-cable to the
USB port of your external hard disk.
3. Connect the other end of the Y-cable which has two USB Type-A
connectors with the following labels connector must be
connected to your PC / Notebook at all times when in use; the
'AUX' is an addition power source, in case your PC / Notebook
does not supply sufficient power strength with one USB port. We
recommend to connecting both USB Type-A (MAIN & AUX)
connectors to your PC / Notebook's USB ports when using the
hard drive.
4. The operating indicator (blue LED) will light up as soon as the
hard drive is connected to a source of electricity.
5. With Windows
recognized and connected.
USB connection
®
XP/Vista the hard disk will be automatically
Setting up
(Back view)
®
has been fully
9