Klarstein AUDREY RETRO Mode D'emploi page 23

Masquer les pouces Voir aussi pour AUDREY RETRO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Problem
Possible Cause
The appliance
There is no power supply.
does not work.
The fuse doesn't work.
The appliance
The appliance is too close
makes a lot of
to the wall, or is not stable,
noise.
or the accessories inside the
refrigerator are placed in
wrong position.
The appliance
The door is too often opened
doesn't cool
or was left opened for a long
enough.
time.
The refrigerator is too close to
the wall.
The refrigerator is too full.
The temperature is badly,
adjusted.
There are smells in
Food made obsolete inside
the appliance.
the refrigerator.
The inside of the device at
need to be cleaned.
Suggested Solution
Check the plug connecting
it others appliance, or
verify that the appliance is
connected to the plug.
Replace the fuse.
Stabilize the base of the
refrigerator by adjusting the
position of feet, take away
the device of the wall, place
correctly the accessories
inside the refrigerator.
Close the door and do not
open it too much frequently.
Take away the device of the
wall to favor the ventilation.
Remove food of the device.
Turn the knurl of regulation of
temperature on [3] or more.
Throw away obsolete food
and wrap the other.
Clean the inside of the
refrigerator.
EN
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1003223810032239

Table des Matières