Electrical Connections - Hinkley 52 OASIS Manuel D'instructions

ELECTRICAL CONNECTIONS

WARNING: Be sure electricity is turned off at the main power box before wiring.
Four wires are connected to the fan.
1
Black - this is the "hot" power to run fan.
*
White - this is the "common" power to run fan and light.
*
Blue - this is the "hot" power for light kit.
*
Green - ground wire (on bracket or downrod).
*
If fan and light are to be connected to the same circuit, black and blue wires
2
can both be connected to house circuit black wire.
NOTE: The other end of the blue wire, (light circuit) is in the switch housing
with a wire nut and label for light kit attachment. The white wire (common for
light kit) is also there.
WARNING: If light kit is not used, DO NOT connect blue wire at the ceiling.
08 | hinkley.com
Fig. 2
Fig. 1
Fig. 3