Axis A Serie Guide D'installation page 20

AXIS T98A-VE Media Converter Cabinet A Series
1
Screw T20 (2x)
2
Electrical safety cover
Connect the Media Converter Cables
Note
The media converter shall be connected using shielded network cables (STP) intended for
their specific use. Make sure that the switch is properly grounded. See Electromagnetic
Compatibility (EMC) for regulatory requirements.
1. Connect the ground cable to the ground screw.
2. Connect the network cables to the network connectors (RJ45, SFP) as required.
3. Connect the power cable to the power connector (DC input).
2
1
20