Publicité
Les langues disponibles
Les langues disponibles
Electrical connections as per NFC15-100 standard
This connection must be made by a formed and qualified technician. Whilst making the connection, the transmitter
must not be energized. The presence of a switch or a circuit breaker upstream the device is compulsory.
•
For 24 Vac/Vdc
models:
24 Vdc
power supply
•
0/4-20 mA current
output connection:
Configuration
Class 310 transmitters allows you to set all the parameters managed by the transmitter: units, measuring ranges, alarms, outputs,
channels... via the different methods shown below:
•
Via keypad, only on models with display. A code-locking system for keypad guarantees the security of the installation.
See configuration manual.
•
Via software (optional): simple and user-friendly. See LCC-S user manual.
•
Via Modbus (optional): configuration of all parameters from your PC.
•
Via Ethernet (optional): configuration of all parameters from your PC.
Mounting
To install the transmitter on a wall, fix the stainless steel plate to the wall (drilling: Ø8 mm, screws and wall-plugs supplied). Insert
the transmitter on the plate (see A on the drawing below) by aligning it at 30°. Rotate the housing in clockwise direction until
you heard a "click" which confirms that the transmitter is correctly installed. Open the housing, lock the clamping system of the
housing on the plate with the screw (see photo below). To remove the transmitter from the fixing plate, do not forget to remove
this screw.
120 mm
A
A
65 mm
316 L stainless steel plate
Accessories
Please refer to the data sheet to get more information about available accessories.
Maintenance: please avoid any aggressive
solvents. Please protect the transmitter
and its probes from any cleaning product
containing formalin, that may be used for
cleaning rooms or ducts.
•
For 110/240 Vac
models:
N
L
N
L
115/240 Vac
power supply
240 Vac
Regulator display or
PLC/BMS passive type
Ø 5,4 mm
Precautions for use: please always use the device
in accordance with its intended use and within
parameters described in the technical features in order
not to compromise the protection ensured by the
device.
•
For 24 Vac/24 Vdc models using power supply
converters:
N
L
Pe
N
N
L
L
24 Vac power supply
Class II
•
0-5/10 V
voltage output
connection:
Regulator display or
PLC/BMS passive type
Fixing screw of the housing
or
N
Pe
N
N
240 Vac
L
L
24 Vac power supply
L
Publicité
