ELAC Discovery Serie Mode D'emploi page 10

Listening to Bluetooth Audio
Pairing your Bluetooth Smartphone/Tablet for Audio
Note: Please note that this process is only for playing back audio from your Bluetooth device. It is not necessary
to pair your device when using the App.
You can begin the paring process by using the smartphone application or the pairing button on the rear panel.
Rear Panel Pairing Process
1. Press and hold the BT Pair button (Fig 1) for 5 seconds or until the LED status light begins flashing red.
2. Go to the Bluetooth settings section on your smartphone and scan for new devices (Fig 2). Select the
Discovery Connect from the list of available devices. It prompted for a pass code, accept that one that is
displayed on your device and choose pair/connect. All audio from your connected device will now come
from the Discovery Z3. Please note that when using Bluetooth you wil have two volume controls (Phone
and Z3)
App Pairing Process
1. Download and install the Discovery Connect App from the Google Play
Store or Apple App Store
2. Launch the App and select the Discovery Connect from the list of devices
(If this is your first time using the app). On t he Control page activate
the Bluetooth Discoverable On/Off selection (Fig 3).
3. Go to the Bluetooth settings section on your smartphone and scan for
new devices (Fig 2). Select the Discovery Connect from the list of
available devices. It prompted for a pass code, accept that one that is
displayed on your device and choose pair/connect.
ELAC Discovery Connect | www.elac.com | Page 9
Fig 3