T&S B-7245 Serie Instructions Pour L'installation Et La Maintenance page 4

General Instructions
General Instructions
Important Safety Instructions
DANGER: Immediate hazards which will result in severe personal injury or death.
WARNING: Hazards or unsafe practices which could result in severe personal injury
or death.
CAUTION: Hazards or unsafe practices which may result in minor personal injury or
product or property damage.
WARNING: Failure to read, understand or follow these instructions could lead to
hazards or unsafe practices which could result in severe personal injury or death.
CAUTION: Do not utilize chemicals in the hose &/or the reel. Chemicals can cause
premature failure of the hose &/or the seals.
CAUTION: Operators need to be instructed on the safe, proper use and maintenance
of this product. Keep this manual for future reference. Hazards or unsafe
practices may result in minor personal injury or product or property damage.
TOOLS: (a) wrench: 5mm, 10mm, 13mm, 16mm & 19mm; (b) nut driver: 8mm and
10mm; (c) needle-nose pliers
(d) cross-recess screw driver #2, and
(e) external retaining ring pliers.
Installation
MOUNTING
Reels complete with hose come set
at proper tension and are ready to
install. (Fig. 1) Fixed base of reel allows
mounting in several diff erent positions
including wall mount, base down, or
base up. Remove four screws on side
of reel to move guide arm.
General Mounting
Requirements
• (Fig. 2) Main-shaft must be horizontal.
• (Fig. 3a) Swivel inlet must be
connected with fl exible hose. Rigid pipe
may cause premature wear and aff ect
performance.
• (Fig. 3b) Centerline of spool assembly
must be in-line with hose pull out.
To adjust guide arm, remove screws
holding it to base and rotate to desired
group of mounting holes.
Fig. 1
Fig. 2
Fig. 3a
Fig. 3b
4