Switching Between Operating Modes - Atlantis NetFly AP5 W300N Mode D'emploi

Save/Reload Settings

Reboot

Click on the desired item to expand the page with all settings in the main
navigation panel.

2.2 Switching between Operating Modes

Click on the Setup Wizard link on the navigation drop-down menu. You will then
see 2 options:
Standard Wireless Access Point Mode: In order to configure NetFly as an

Access Point. IP is 192.168.1.252 (access through WLAN or LAN).
DHCP Server disabled.
Wireless Repeater Mode (Station): In order to configure NetFly as a

Repeater+AP. IP is 192.168.1.252 (access only through LAN). DHCP
Server enable. Once the device is connected to anhoter AP the DHCP
Server is disabled.
Click on the Next button to continue
34