Kampa Sunshine AIR Pro 300 Mode D'emploi page 6

Keep pumping until the ideal inflation pressure of 9 psi (0.62 BAR) is achieved. If necessary take a rest
before adding more pressure.
Optional Side Wall Set-Up
Attach the AccessoryTrack awning bracket to the AccessoryTrack placement located in the inside corners of
your sunshine awning (13e).
Clip the hooks at the top of the side wall fabric to the long pole (14).
Place the hooked end of the pole into the AccessoryTrack awning bracket (15e) then push the open end of
the pole onto the connection point inside the front corner of the awning (16f).
Use the locking mechanism (17) once in place to stabilise the pole and help keep side walls taut.
Attach the ladder pegging straps to the anchor points located at the bottom of the side walls, then start by
pegging the rear pegging points of the side wall (18g) slightly underneath your caravan.
Continue pegging the remaining pegging points of the side wall.
SUN-AIR-UM-0519
6