Publicité
Liens rapides
SLIDING DOOR HARDWARE - BY PASS
BYP-250A •
For 2 doors up to 250 lbs. each with thickness of 1-3/8" to 1-3/4"
Tools Required • Outils requis • Herramientas requeridos
Wrench (included) • Clé (incluse) • Llave (incluida)
Drill (3/32", 3/16", 3/8") • Perceuse (3/32", 3/16", 3/8") • Taladro (3/32", 3/16", 3/8")
Phillips Screw Driver • Tournevis Phillips • Destornillador Phillips
Fine Tooth Saw (optional) • Scie à dents fines (optionnelle) • Sierra de dientes finos (opcional)
CONTENTS
A. Track
B. Carrier
C. Quick Release Top Mount Plate
D. Door Guide
E. Spacer Kit
F. #8 x 1-1/2" Pan Head Screw
QUINCAILLERIE POUR PORTE COULISSANTE – BY PASS
BYP-250A •
Pour 2 jusqu'à 113,3 kg chacune d'une épasseur de 3,5 cm à 4,4 cm
CONTENU
A. Coulisse
B. Rouleaux décalés
C. Plaque de montage supérieure
à dégagement rapide
D. Guide de plancher
HERRAJE PARA PUERTA CORREDIZA - TIPO BY PASS
BYP-125A & BYP-150A •
à 4,4 cm de grosor
CONTENIDO
A. Caril
B. Portador
C. Placa de montaje superior
fácilmente desmontable
D. Guía del piso
2-Door
2
B.
4
4
1
1
39
2-Portes
2
4
4
1
Para 2 puertasde hasta 113,3 kg cada una y de 2,5 cm
2-Puertas
2
4
4
1
C.
E.
F.
CONTENU
E. Espaceur
F. #10 x 1-1/2" Vis tête cylindrique
CONTENIDO
E. Kit espaciador
F. #8 x 5/8" Tornillos cabeza plana
#310304_A (1012)
Assembly
Instructions
A.
D.
#310304_A (1012)
Instructions
d'assemblage
2-Portes
1
39
#310304_A (1012)
Instrucciones para
el ensamblaje
2-Puertas
1
39
Publicité
Manuels Connexes pour Knape & Vogt BYP-250A
Sommaire des Matières pour Knape & Vogt BYP-250A
- Page 1 SLIDING DOOR HARDWARE - BY PASS #310304_A (1012) Assembly BYP-250A • For 2 doors up to 250 lbs. each with thickness of 1-3/8” to 1-3/4" Instructions Tools Required • Outils requis • Herramientas requeridos Wrench (included) • Clé (incluse) • Llave (incluida) Drill (3/32", 3/16", 3/8") •...
- Page 2 #310304_A (1012) SLIDING DOOR HARDWARE - BY PASS Assembly Instructions PREPARE OPENING Hmax = Door Height + 3-3/4" • Hmin = Door Height + 2-13/16" 2-7/16" - 3-1/4" (6,2 cm - 8,3 cm) 2-Door Width = 2 x Door Width - 1" Opening Height Hauteur Ouverture Altura Abertura...
- Page 3 #310304_A (1012) SLIDING DOOR HARDWARE - BY PASS Assembly Instructions HANG DOORS • Open quick release latches on brackets. • Slide door onto carrier screws and close latch. • Repeat for front door on front rail. ADJUST AND FINISH • Adjust door to square with sides of door opening by rotating carrier adjustment screw. •...
- Page 4 Instructions d’assemblage QUINCAILLERIE POUR PORTE COULISSANTE - BY PASS Instrucciones para HERRAJE PARA PUERTA CORREDIZA - TIPO BY PASS el ensamblaje PRÉPARATION DE PREPARAR ABERTURA L’OUVERTURE Altura máxima = Altura de la puerta + 9,5 cm Altura mínima = Altura de la puerta + 7,1 cm Hmax = Haut.