QFX PBX-2250 Mode D'emploi page 3

REAR PANEL
1. Power Switch: ON/OFF.
2. Light Switch: ON/OFF
3. Mode Button: Toggle between AUX, USB, TF, FM, BT
Previous Track Button:
Select Previous Track:
Play/Pause Button: Play Track and Pause Track
Next Track Button: Select next track
RECORD: Record on to a USB or TF Card
MIC.PRI: Press to select/exit Microphone Priority
4. 5 Band Graphic EQ
5. Master Volume Knob: Adjust from Min to Max
6. Bass Knob: Adjust from Min to Max
7. Treble Knob: Adjust from Min to Max
8. Microphone Echo Knob: Adjust from Min to Max
9. Microphone Volume Knob: Adjust from Min to Max
10. USB Input
11. TF Card Input
12. AUX IN
13. Microphone Input
14. DC 12V
15. Battery Indicator Light
16. Power Supply: AC100-240V 50/60Hz
RECORDING FUNCTION
Insert a USB or TF Card into the slot. Connect the Wired
microphone and make sure microphone is active. Press
and hold the "RECORD" key to start recording. Press
"RECORD" to begin playing the recorded file. Press
"RECORD" again to exit the recording function.
DISPLAY SYSTEM SETTINGS
1. Input Mode: The LED display screen will display the
information of input mode for USB/TF/BT
AUX/FM. When a USB flash drive/TF Card is inserted
into the USB/TF input, the unit will automatically
switch to USB/TF mode and begin playing .mp3
audio files from the USB/TF Card.
2. Track Number: The track number currently playing
from the USB/TF will display.
3. FM Mode: All FM channels display here. Press
"Play/Pause" Key for auto scan all channels.