QFX PBX-2250 Mode D'emploi page 2

WARNING!
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER. THERE
ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN
To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate
this product near any liquids, heat sources such as radiators and heat registers. Clean only with a dry cloth.
Users should exhibit extra safety when this symbol appears in this instruction manual and follow all
precautions as they are stated.
PBX- 2250 BATTERY
The PBX-2250 is a acid battery powered PA loudspeaker.
Be sure that you have completely charged the battery prior to first use to maximize the battery's
lifespan. Once the power cord is connected to a power source, it will automatically begin charging ( 4~6
hours to fully charge the acid battery ). Even if the battery power is low, it will power on when connected to a
power source. Upon completion of the charging, please disconnect the power cable. With standard usage, a
fully charged battery can play for about 2-3 hours. Battery can be recharged about 300 times in its lifetime.
When not in use, the speaker should always be set OFF to prevent the unit from draining the battery. When
the unit is not used for prolonged periods of time, the battery will gradually lose its power. It is recommended
to fully charge the battery at least every 60 days.
PBX-2250 BLUETOOTH
Bluetooth Mode: Find the Bluetooth name of the unit called "QFX PBX-2250" on your mobile device to
connect. After a successful connection, you can play the music from speaker. You won't need reconnect the
Bluetooth when switching mode.