Velleman VelLight LEDA301 Mode D'emploi page 7

• This luminaire does not have a built-in device to disconnect it from
the electric mains. Make sure to electrically isolate the luminaire
before installation or maintenance activities are performed.
• Wipe the device regularly with a moist, lint-free cloth. Do not use
alcohol or solvents.
• There are no user-serviceable parts.
• Contact your dealer for spare parts if necessary.
8. Technical Specifications
power supply
max. power
LED
colour
temperature
beam angle
luminous flux
dimensions
weight
Use this device with original accessories only. Velleman nv
cannot be held responsible in the event of damage or injury
resulting from (incorrect) use of this device.
For more info concerning this product and the latest version
of this manual, please visit our website www.velleman.eu.
The information in this manual is subject to change without
prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All
worldwide rights reserved. No part of this manual may be copied,
reproduced, translated or reduced to any electronic medium or
otherwise without the prior written consent of the copyright holder.
V. 01 – 05/09/2012
LEDA301/302/303
LEDA301
230 VAC
10 W
10 W COB
Epistar
6500 K
120°
900 – 1000 lm
115 x 90 mm
1 kg
LEDA302
230 VAC
30 W
30 W COB
Epistar
6500 K
120°
2700 – 3000 lm
225 x 185 mm
1.87 kg
7
LEDA303
230 VAC
50 W
50 W COB
Epistar
6500 K
120°
4500 – 5000 lm
290 x 240 mm
2.61 kg
©Velleman nv