Fritz! DECT 210 Guide Rapide page 18

Registering with a FRITZ!Box
Action
Insert FRITZ!DECT 210 into an outlet near your FRITZ!Box. The DECT LED
1
fl ashes steadily.
Within 2 minutes, press the DECT button on your FRITZ!Box, and hold it down
until the Info or DECT LED starts fl ashing.
FRITZ!DECT 210 is registered with the FRITZ!Box. The Wi-Fi connection has
been established when the DECT LED on FRITZ!DECT 210 lights up.
2
Now insert FRITZ!DECT 210 into the socket where you would like to use the
device and wait a moment for the DECT LED to light up.
3
18
If DECT continues to fl ash, registration was not successful. Remove
FRITZ!DECT 210 from the power outlet and repeat the registration
process.
If DECT keeps fl ashing, test a diff erent outlet closer to the FRITZ!Box.
The outlet must be located within the range of the DECT radio network
of the FRITZ!Box.