Carrera Sinus Ultra Mode D'emploi Et Garantie page 23

IM_Sinus_Ultra_9611031_D-GB-F-PL:IM_Sinus_ 11.08.2010 11:12 Uhr Sei
All manuals and user guides at all-guides.com
You can use the timer button ˜ (clock symbol) to select one of
three processing times: 3, 5 or 10 minutes, depending on the
type and size of the object and how dirty it is. Each time you turn
the device on, the processing time "3 minutes" is pre-selected by
default.
Attention! Optical lenses (whether glass or plastic) are not per-
mitted to be cleaned in the ultrasound bath for more than one
minute. This means that you must manually interrupt the clean-
ing process for these objects after one minute (press the ON/OFF
button for the timer ™).
You can select the processing time that you want by repeatedly
pressing the timer button ˜ (clock symbol). A red LED š lights
and indicates which processing time you have selected.
To start or stop the selected cleaning process, press the ON/OFF
button for the timer ™. After the processing time that you have
selected has completed, the cleaning process is automatically
ended and the blue indicator lamp goes out. To stop the cleaning
process before the timer has expired, press the ON/OFF button
for the timer ™.
After the cleaning process has ended, pull the plug out of the
socket with earth contact, open the cover — and remove the
cleaned object from the device. Rinse the cleaned object briefly
under running water in order to remove any remaining dirt parti-
cles and cleaning agent residue
19