Use - Carrera Sinus Ultra Mode D'emploi Et Garantie

IM_Sinus_Ultra_9611031_D-GB-F-PL:IM_Sinus_ 11.08.2010 11:12 Uhr Sei
All manuals and user guides at all-guides.com

Use

Open the lid of the device. Place the item to be cleaned in the
middle of the basket insert supplied to achieve the best cleaning
result.
Cleaning watch straps:
You can use the curved insert supplied for metal watch straps.
As it rises above the MAX marking, you can place watches in the
device. You do not need to remove the watch from the strap;
simply fix the watch in such a way that the watch part
itself is above the cleaning liquid (see ill. page 57).
Important: If the watch mechanism is immersed in the liquid, it
may be damaged by the ultrasonic waves during the cleaning
process.
Then fill the tank with water.
If the tank overflows, wipe the outside of the device dry immedi-
ately. The liquid must cover the item to be cleaned, but should
never come above the maximum filling depth marking.
Attention: If you carry out the cleaning without water, you could
damage the ultrasonic cleaner.
Close the lid and plug in the device.
Warning: The mains voltage should be 220-240 V ~ (see rating
plate on underside of device).
A blue indicator lamp illuminates the interior and indicates that
cleaning is in process. During the cleaning process, a low vibrat-
ing noise can be heard; this is caused by the cleaning process
running in the fluid tank.
18