General Settings - Psm - JVC KD-ADV5490 Manuel D'instructions

General settings — PSM
You can change PSM (Preferred Setting Mode) items
listed in the table below and on page 29.
1
Enter the PSM settings.
2
Select a PSM item.
Indications Item
(
DEMO • DEMO ON
Display
demonstration • DEMO OFF
CLOCK DISP *
1 • CLOCK ON
Clock display
• CLOCK OFF
CLOCK HOUR 1 – 12
Hour adjustment
CLOCK MIN 00 – 59
Minute adjustment
CLOCK ADJ *
2 • AUTO
Clock adjustment
• OFF
TIME ZONE * *
2, 3 —
Time zone
28
Setting, [reference page]
: Initial)
: The display demonstration will be activated automatically if no
operation is done for about 20 seconds, [7].
: Cancels.
: The clock time is shown on the display at all times when the power is
turned off.
: Cancels; pressing DISP will show the clock time for about 5 seconds
when the power is turned off, [7].
[Initial: 1 (1:00)], [7].
[Initial: 00 (1:00)], [7].
: The built-in clock is automatically adjusted using the clock data
provided via the satellite radio channel.
: Cancels.
: Select your residential area from one of the time zones for clock
adjustment.
EASTERN, ATLANTIC, NEWFOUND, ALASKA, PACIFIC, MOUNTAIN,
CENTRAL
3
Select or adjust the selected PSM item.
4
Repeat steps 2 and 3 to adjust other PSM
items if necessary.
5
Finish the procedure.