Publicité
Les langues disponibles
Les langues disponibles
8' ELECTRIC TELESCOPING POLE SAW
PRODUCT
IDENTIFICATION
Trigger
Switch
Trigger
Lock-out
Switch
Power Cord
Figure 1 - Pole Saw Product Identification
POLE SAW NAMES
AND TERMS
Coupling Nut Threaded collar (loosen to
slide inner pole, tighten to hold pole in
position).
Guide Bar Metal bar that extends from
saw body. The guide bar supports and guides
chain.
Inner Pole The moveable section of tub-
ing to which the saw is attached.
Kickback Quick backward and upward
motion of guide bar. Kickback may occur
when tip of guide bar touches an object
while chain is moving. The guide bar will
kick up and back towards operator.
®
Grip Area
Outer Pole
Oiler Control System for oiling guide bar
and chain.
Outer Pole Retains the moveable inner
pole.
Saw Chain (Chain) Loop of chain having
cutting teeth for cutting wood. The motor
drives chain. The guide bar supports chain.
Sprocket Toothed wheel that drives chain.
Switch Device that completes or interrupts
electrical circuit to motor of saw.
Switch Lockout Device that reduces
accidental starting of saw.
Oil Cap
Power
Cord
Coupling
Nut
Tighten
Trigger Device that turns saw on and off.
Squeezing trigger turns saw on.
Releasing trigger turns saw off.
Trimming (Pruning) Process of cutting
limb(s) from a living tree.
Undercut An upward cut from underside
of log or limb. This is done while in normal
cutting position and cutting with top of
guide bar.
4
Hand Guard
Handle Bracket
Inner Pole
Loosen
Saw Chain
Guide Bar
104673
Publicité
