Great Plains Industries TM Serie Manuel De L'utilisateur page 7

*
Do not allow fluid to freeze inside meter.
**
Weight with computer display. Conditioned
signal output module adds .30 lbs.
***
Dimensions with computer display. Condi-
tioned signal output module adds 1.1 inch
to height.
Metric Measurement
Unit of Measure: Litre
Flow Range:
1/2 inch 3.8 - 38 LPM
3/4 inch 7.6 - 76 LPM
1 inch 19 - 190 LPM
1-1/2 inch 38 - 380 LPM
2 inch 76 - 760 LPM
Accuracy with Computer: ± 3.0% (Accuracy
can be improved with field calibration)
Operating Temperature:
Storage Temperature: –40° to +70° C
**
Product Weight:
1/2 inch .141 kg
3/4 inch .173 kg
1 inch .232 kg
1-1/2 inch .368 kg
2 inch .518 kg
Dimensions - cm (W x H x L):
1/2 inch 5.1 x 6.4 x 10.9
3/4 inch 5.1 x 6.9 x 13.5
1 inch 5.1 x 7.6 x 15.2
1-1/2 inch 5.8 x 9.1 x 17.8
2 inch 7.1 x 10.4 x 19.1
*
Do not allow fluid to freeze inside meter.
**
Weight with computer display. Conditioned
signal output module adds .136 kg.
***
Dimensions with computer display. Condi-
tioned signal output module adds 2.8 cm to
height.
*
0° to +60° C
***
PARTS
The following replacement parts and acces-
sories are available for the TM Series meters:
Part No. Description
113435-1 Conditioned Signal Output Module
113520-1 Battery Replacement Kit
116000-1 Calibration Container, Large (5 gallon)
125508-01 1/2 inch, Soc Turbine Assy Kit
125508-02 1/2 inch NPT, PVC Turbine Assy Kit
125510-01 3/4 inch, Soc Turbine Assy Kit
125510-02 3/4 inch NPT, PVC Turbine Assy Kit
125512-01 1 inch, Soc Turbine Assy Kit
125512-02 1 inch NPT, PVC Turbine Assy Kit
125514-01 1-1/2 inch, Soc Turbine Assy Kit
125514-02 1-1/2 inch NPT, PVC Turbine Assy Kit
125516-01 2 inch, Soc Turbine Assy Kit
125516-02 2 inch NPT, PVC Turbine Assy Kit
901002-52 O-Ring
Computer Kits:
125509-01 1/2 inch, Computer Assy Kit
125511-01 3/4 inch, Computer Assy Kit
125513-01 1 inch, Computer Assy Kit
125515-01 1-1/2 inch, Computer Assy Kit
125517-01 2 inch, Computer Assy Kit
SERVICE
For warranty consideration, contact your local
distributor. If you need further assistance, con-
tact the GPI Customer Service Department at:
1-800-835-0113
You will need to:
• Provide information from the decal on your
meter.
• Receive a Return Authorization number.
• Flush any fluid from the meter before ship-
ping to the factory.
• If possible leave customer installed fittings or
ample length of bare pipe for reinstallation.
CAUTION
Do not return the meter without specific
authority from the GPI Customer Service
Department. Due to strict regulations gov-
erning transportation, handling, and disposal
of hazardous or flammable liquids, GPI will
not accept meters for rework unless they
are completely free of liquid residue.
7