Télécharger Imprimer la page

Pepperl+Fuchs DA5-IU-C Caractéristiques Techniques page 18

Masquer les pouces Voir aussi pour DA5-IU-C:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

DA5-IU-C
6. Technical data
Display:
5-digit 7-segment LED
display, height 8 mm
Measuring ranges: 0 ... 10 VDC
2 ... 10 VDC
0 ... 20 mA DC
4 ... 20 mA DC
Resolution:
14 bits
Accuracy:
0.1% ± 1 digit over the
whole measuring range at
20°C
Null balancing:
automatic
Temperature drift: < 70 ppm/K
Measuring time:
0.1 sec/0.5 sec
Current measurement:
voltage drop:
max. 2.0 V DC
current limitation: 50 mA
Voltage measurement:
input resistance: > 1 MΩ
max. input voltage: 30 VDC
Voltage supply:
10 ... 30 V DC,
galvanically isolated
external fuse T 0.1 A
Current consumption: max. 50 mA
Ambient temperature: -20 °C ... +65 °C
Storage temperature: -25 °C ... +70 °C
Data backup:
EEPROM
1 million storage cycles
or 10 years
Weight:
approx. 50 g
Protection level:
IP65 (front side)
EMC:
EN 55011 Class B,
EN 61000-6-2,
EN 61000-6-3,
EN 61326-1
Error messages:
Err 0*
Error/failure in the A/D section
Err 1** Invalid value (during programming)
Err 2** LoLim < HiLim (during programming)
Err 3*
Error/failure in FRAM
Err 4** Analog input signal exceeds the
valid measuring range
Err 5*
Error/failure in FRAM. Device null
balancing not performed
*
Please send device back for inspection
**
Check input signal and programming
Page 8 (R60046.9398 - Index 1)
7. Scope of the delivery
– Digital display
– Mounting clip
– Front bezel for screw fastening
cut-out 50x25 mm
– Front bezel for mounting clip fastening
cut-out 50x25 mm
– Seal
– 1 sheet of adhesive symbols
8. Examples
8.1 Temperature measurement
A temperature sensor with linear characte-
ristics (in case of non-linear sensors, install
linearizing components upstream) delivers 0 V
at -10°C and 10 V at 80°C. The selected mea-
suring range is 0 ... 10 V. 0 V is the smallest
measured value possible. The display value
-10 is now assigned to this measured value.
Accordingly, 10 V is the largest measured
value. The display value 80 is assigned to this
measured value. The display is now set for the
sensor and can display any intermediate value.
Display value freely positionable
within the measuring range

Publicité

loading