nomad Base Station Instructions page 2

Plugging in the Base Station
• Plug the power adapter into the circular DC 18V plug on the backside of the Base
Station.
• Plug the power adapter into a wall outlet using desired International AC adapter
piece.
• Your Base Station is now receiving power and is ready for charging.
Using USB Ports for Charging
• On the backside of the Station, there are two additional ports for charging: you
will find one USB-A port and one USB-C port.
• Plug in your USB-A or USB-C cable on the backside of the Station.
• Place your Station on any flat and level surface with the cables coming out of the
back away from you.
• You are now ready to charge your devices.
USB Ports and Charging Speed
• As you may have read above, the backside of your Station houses 2 different USB
ports.
• The USB-A port has a max output of 10W. The USB-C port has a max output of 18W.