Smartpond 71140 Mode D'emploi page 8

MAINTENANCE
• The Color Changing Light Set may require cleaning from time to
time for optimal performance.
• Before cleaning, always disconnect from the power source.
• Use a soft cloth or brush and warm water to clean the parts.
• Reconnecting to the power source when you are finished.
TROUBLESHOOTING
• Check to make sure you have turned on the lights using the
remote.
• Check to make sure the plastic tab has been removed from
the remote.
• The remote sensor will time-out during periods of inactivity.
If your selection is not being read, simply press the "strobe"
and "fade" buttons simultaneously before making your next
section.
• Make sure to replace the 1 CR2025 battery every 6 months.
• Make sure the remote is within range of the remote sensor.
• If lights fail to illuminate, check that lights are getting power
by testing another appliance in the same power outlet.
• The light is designed to turn on when it gets dark, and turn off
when it gets light. To activate the light during daylight hours,
cover the sensor.
• If lights do not turn off during daytime, check sensor. Make
sure the sensor faces up and is not covered by dirt or debris.
6
VISIT WWW.SMART-POND.COM FOR PRODUCT INFORMATION AND TIPS.