E+E Elektronik THERMOPORT 20 Manuel page 33

Manual
Important: Calibrations only make
sense if they are carried out by special-
ly skilled persons using appropriate
calibration equipment.
CAL2: CAL2 (one point calibration) gives the user the possibility to
set an offset for temperature 2. The offset is displayed on the upper
part of the screen.
The maximum offset on the TC channel is +/- 10°C/°F in 0,1°C/°F
step.
The offset is valid over the complete measuring range.
Factory calibration can be obtained by setting the offset to 0.0.
THERMOPORT 20 english
page 33