audiophony HELIUM Série Guide De L'utilisateur page 15

HELIUM Series - Mini line array system
4 - Rear panels description
Rear panels of subwoofers. Both subwoofers have the same features.
2
1
Rear panels of satellites
1
Power plug
Connector for power cord supplied.
Only use the supplied cable or its equivalent.
2
Power button
Please make sure the LEVEL knob is at 0 before
deactivating your device.
3
INPUT1 and INPUT2
Balanced inputs via combo Jack/XLR plugs.
Connect here an incoming signal from your mixing desk
or any other line-level source.
3
8 7
9
4
4
VOLUME
Allows you to adjust the main volume of the system.
It can be set at its maximum, however, please avoid
exceeding 0dB coming from your mixing desk.
5
OPERATION MODE switch
Allows you to select one of the two modes of the system:
- STEREO: Signals present on INPUT1 and INPUT2 are
amplified and sent to OUTPUT1 and OUTPUT2.
- PARALLEL: The signal on INPUT1 only is amplified
and sent to OUTPUT 1 and OUTPUT2.
6
BASS
Allows you to adjust basses from the subwoofer.
7
LINK1 and LINK2
These two XLR female sockets are wired in parallel with
INPUT1 and INPUT2.
They allow you to send incoming signals to another
system.
8
OUTPUT1 and OUTPUT2
Outputs connecting the satellites via Speakon.
9
INPUT and LINK
Input / output via Speakon connectors.
5
6
Page 15