CAR SEAT INSTALLATION AND REMOVAL
1
A.
Engage the parking brake on the carrier. Insert the
car seat (See Image 1) with the occupant facing
toward the handlebar. The car seat should be angled
according to the car seat manufacturer's instructions.
B.
Buckle the seat strap over the car seat and pull the
strap tight. (See Image 2)
C.
Verify that the car seat is securely attached to the
carrier by gently lifting up on the car seat handle.
D.
To remove the car seat from the carrier, apply the
parking brake, unbuckle the seat strap, and lift the
car seat up out of the car seat adapter.
Thule Sweden AB, Borggatan 5, 335 73 Hillerstorp, SWEDEN
Thule Canada Inc., 2308 Portland Street SE, Calgary, AB, T2G 4M6
51100989 - D
2
WARNING
If the car seat cannot sit at the right
angle, the car seat does not fit the
adapter and cannot be used with the
Thule Car Seat Adapter.
WARNING
Your child should always be facing you
when using the Thule Car Seat Adapter.
Never place a car seat in the Thule
Car Seat Adapter with the child facing
forwards on the carrier.
Never leave the carrier unattended when
a child is in a car seat attached to the
carrier.
When using the Thule Car Seat Adapter
always secure the child in the car seat
with the car seats manufacturer's seatbelt.
info@thule.com
Phone: 800-238-2388
© Thule Group 2017. All rights reserved.
www.thule.com
5