Publicité
Les langues disponibles
Les langues disponibles
EN
14
COMMISSIONING AND OPERATION
•
Shut off all devices that ought to be connected. To be sure, take out the
proper fuse.
•
Make sure that the subwoofer is OFF and turn down the GAIN control.
Set the FREQ control to about center position.
•
Connect the mains cable with a socket.
•
Connect the subwoofer to an amplifier as shown in the connection
diagrams below. For amplifiers with one subwoofer-output it makes no
difference whether you use the right or left input of the subwoofer.
•
Switch your amplifier and subwoofer on (switch: OFF - AUTO - ON).
•
Play some music.
•
Turn the GAIN control slowly until you reach the desired level.
•
Set the FREQ control to achieve your desired tone.
•
Vary the position of the PHASE (phase reversal switch). Choose the
position that offers the tightest bass foundation for the combination
with your other speakers
•
You can slide the power switch to the position AUTO. This will make the
subwoofer wake up anytime you start any music playback.
HINTS ON DISPOSAL
According to the European waste regulation 2012/19/
EU this symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this
product is disposed of correctly, you will help prevent
potential negative consequences for the environment
and human health, which could otherwise be caused by
inappropriate waste handling of this product. For more
detailled information about recycling of this product,
please contact your local council or your household
waste disposal service.
PRODUCER
Chal-Tec GmbH, Wallstraße 16, 10179 Berlin, Germany.
Publicité
