Blumfeldt Titus Mode D'emploi page 19

Place the charcoal grid (F) in upper stove
assembly (G) and attach it onto the
support bracket. Then place chimney
mesh cover (B) and chimney cap (A) on top
of chimney body (C).
Insert the ash tray assembly (I) into the
track on upper Place the poker (K) on the
log rack assembly (L).
Lighting instructions
Open the sliding door using the poker, and put the logs (less than 1.5 kg) on the
charcoal grid.
Note: Make sure log does not extend to the charcoal grid edge, and the log
height does not extend 35 cm. The fire height should not extend 3/4 the
height of screen.
Light dry wood chips under logs. Close the sliding door with poker.
Support bracket
EN
19