Installing The Receiver Inside A Helmet - Albrecht PR-446 Guide D'utilisation

5. Installing the receiver inside a helmet

If you would like to use the PR-446 receiver inside a helmet, install it this way:
1. Put the velcro strap through the opening at the bottom of the unit (1) and fix it at this end like
shown in graphic (2) below.
2. Wrap the velcro around the helmet straps (3). The speaker should show upwards towards the
helmet.
3. Alternatively put the receiver inside the transparent protection bag (4) and install it at the straps
of the helmet (5)..
1.)
3.)
5.)
14
2.)
4.)