Exhaust Ducting; Grounding Instructions - Splendide DV6400X Instructions D'utilisation, D'installation Et D'entretien

Installation

Exhaust ducting

EN
WARNING
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death
or fire.
The ducting system for the dryer must be as short
and straight as possible and with as few elbows as
possible. Four-inch (102 mm) rigid metal ducting
should be used, metal flexible ducting can be used
but the maximum length of ducting if used is 7ft
(2.4m) and provided it complies with the following:
Never use plastic ducting. All elbows must also be
a minimum of 4-inch (102mm) diameter. Joints must
be secured with ducting tape. Do not use screws or
other metal fastenings that extend into the duct, as lint
can collect on the screws.
Maximum length of rigid duct:
Number of
Elbows
0
1
2
3
The above assumes that an approved venting hood
is used and that the flap on this hood must not have
magnetic catches.
Contact Westland for additional information.
12
Fire Hazard
Rigid Duct (only)
22 ft. (6.6m)
18 ft. (5.4m)
14 ft. (4.2m)
6 ft. (1.8m)
IMPORTANT:
- The appliance MUST NOT be exhausted into a
chimney, a wall, a ceiling, an attic, a crawl space
or a concealed space of a building.
- To reduce the risk of fire, this appliance MUST BE
EXHAUSTED OUTDOORS.
- Do not discharge the exhaust air into a flue, which
is used for exhausting fumes from other appliances
burning gas or other fuel.
Depending on the frequency of use it is essential that
the ducting is checked periodically and any fluff or
debris removed.

GROUNDING INSTRUCTIONS

For a grounded, cord-connected dryer:
This dryer must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock
by providing a path of least resistance for electric current.
This dryer is equipped with a cord having an equipment-
grounding conductor and a grounding plug. The plug must
be plugged into an appropriate outlet that is properly
installed and grounded in accordance with all local codes
and ordinances.
WARNING:
Improper connection of the equipment-
grounding conductor can result in a risk of electric shock.
Check with a quali ed electrician or service representative
or personnel if you are in doubt as to whether the dryer is
properly grounded. Do not modify the plug provided with
the dryer: if it will not t the outlet, have a proper outlet
installed by a quali ed electrician.
SAVE THESE INSTRUCTIONS