Publicité
Les langues disponibles
Les langues disponibles
IV. GETTING STARTED
4.1- Unpacking
•
Remove the product from packaging
•
Check if the product and accessories (if any) are intact.
4.2- Content
•
1 Fan (without battery pack and charger)
•
1 Instruction manual
4.3- Assembly
The product does not require assembly prior to first time use.
Using general-purpose AC
• Connecting the power plug to general-purpose AC source (100-240 V, 50/60 Hz).
Using Ribimex 20V Li-ion battery packs (purchase separately)
•
Before battery pack installation or removal, switch off the fan.
•
To install the battery pack, insert it into the battery compartment on the fan. (See Fig. 2)
•
To remove the battery pack, press the release button and pull the battery pack out.
4.4- Switch On/Off
•
To switch ON the fan, press
mode.
•
To switch OFF the fan, press
Fig. 2
button once, then the fan will start to work on High speed
button once.
Page 11 / 22
Publicité
