Publicité
Les langues disponibles
Les langues disponibles
Operation of the remote control (Continued)
COOL mode
Press the "MODE" key, select the "
" mode, and Press the down arrow key
to set the temperature lower than the room temperature. Press the "FAN " key
to select different speed and the plenum will display "
" and the set
temperature.
DRY mode
Press the "MODE" key, select the DRY mode, the air volume is un- adjustable
to stay at minimum level, and the plenum will display "
" and the set
temperature. Make sure to adjust the setting temperature at least 1 ℃ lower
than room temperature to make the dry mode working.
FAN mode
Press the "MODE" key, select the FAN mode, Press the "FAN" key. Select
Low/Medium/High/AUTO. The plenum will display "
" and the indoor
environment temperature.
HEAT mode
Press the "MODE" key, select the HEAT mode, Press the up arrow key to set
the temperature higher than the room temperature. Press the FAN key to select
different speed. And the plenum will display "
" and the set temperature.
Operation instruction
17
Publicité
