Rear Panel - Rami TEL 400 Manuel Utilisateur

REAR PANEL

Made in Europe (Fr) Made in Europe (Fr)
CONFIG. +
230V 50/60Hz 12W T 250mA L CALL STATUS
M L
A) RJ11 connector, to connect to the net.
B) RJ11 to connect an handset.
Note : according to the handset, the cord wiring can differ. To face this problem TEL 400 offers two connexion
types.
Left connector (STD A) : pins 2 and 3 on RJ 11 ( 2 middle pins)
Right connector (STD B) : pins 1 and 4 on RJ 11 ( 2 outer pins)
C) Key for mixing A and B hybrids.
Key down : "ON" is light , the two hybrids are mixed.
Key up: "OFF" is light, mixing is disabled
D) A hybrid "SEND" input XLR female connector.
E) A hybrid " RETURN" output XLR female connector
F) Sub-D 15 female connector for remote control and audio signal A hybrid.
An ordinary male/male 15 pins wire connect Tel 400 to RP200 mixing desk.
G) 15 pins female Sub-D 15 for use with remote control TEL 400R (or withRP2000)
Option
H) Hybrid B Audio signal to be sent, input female XLR
I) Hybrid B received signal from remote location output, male XLR
J) Sub-D 15 female connector for remote control and audio signal A hybrid.
An ordinary male/male 15 pins wire connect Tel 400 to RP200 mixing desk wiring same as A.
K) Waiting audio signal input female XLR.
L) 9 pins female Sub-D (Config + Call Status) .
Various features are set using loops e.g.: automatic hook,
external ring disabling ...
M) CEI power supply connector.
PUSH
STANDBY
MODULATION REMOTE CONTROL RETURN
K J I
Send Audio
IN
+
-
Return Audio OUT +
-
8
15
G
PUSH
B
TEL 400 R
SEND REMOTE CONTROL RETURN
H F E
Lamp 24V/20mA
-
1 Loop (hold)
9
Sub-D 15 pins male plug
Closed loop
18
PUSH
A
PRIVATE
MIX A+B
ON
OFF
SEND STD A STD B
D C B
2
3
1
1
3
2
Ring indication
Mute ring IN
OUT
5
9
(ON)
Auto hook IN
PHONE LINE
LINE B LINE A
A
3 pts Female XLR
1: Frame ground
2: + signal
3: - signal
XLR 3 pts Male
1: Frame ground
2: + signal
3: - signal
1
6
Sub-D
9 pins male plug
TEL 400