Description Of Controls - Angelo Po 1G0GRG Manuel D'utilisation Et D'installation

The appliance is fitted with the controls for use of its
main functions.
A)Burner control knob: for lighting, turning off and
regulating the relative burner and pilot light
Off marker
A
Lighting
1 - Turn on the gas supply tap.
2 - Press the knob (A) and turn it anti-clockwise
(pos. 1) while at the same time pressing the pi-
IT IT
ezoelectric ignition knob (B) repeatedly to light
the pilot light.
3 - Keep the knob pressed for about 15 sec. to
GB GB
prime the thermocouple.
4 - Turn the knob (A) anti-clockwise (pos. 2) to light
DE DE
the burner.
5 - Turn the knob (A) gradually anti-clockwise to
FR
FR
adjust the power of the flame down to the mini-
mum setting (pos. 3).
ES ES
Turning off
6 - Turn the knob (A) clockwise (pos. 1) to turn the
burner off.
The pilot light will remain on to allow the burner
to be re-lit.
7 - Turn the knob (A) clockwise (pos. 4) to turn off
the pilot light.
8 - Turn off the knob to ensure safety.
English

DESCRIPTION OF CONTROLS

Pilot light marker
SWITCHING THE BURNER ON AND OFF
B)Piezoelectric ignition button; lights the burner
pilot light.
Piezoelectric ignition marker
B
B
Full power marker
Minimum power marker
A
- 8 -
A
B
1
2
3
4
IDM-39606100200.tif
A B
IDM-39606100300.tif