TFA 60.1029 Mode D'emploi page 7

TFA_No. 60.1029_Anleit_06_21
Alarm clock
4.2 Setting of the alarm time
• Turn the left dial (see symbol) and set your respective alarm time
(in direction of the arrow).
• Slide the ALARM switch ON/OFF to the right (ON).
• The alarm is activated.
• Once the alarm starts to ring you can activate the snooze function
by pressing the LIGHT/SNOOZE button. The alarm will be inter-
rupted for 5 minutes.
• To deactivate the snooze function and the alarm function, slide
the ALARM switch to the left (OFF).
5. Backlight
• Press the LIGHT/SNOOZE button to activate the backlight shortly.
• A weak backlight turns on automatically as soon as the light sen-
sor registers darkness.
6. Care and maintenance
• Clean it with a soft damp cloth. Do not use solvents or scouring
agents.
• Remove the batteries if you do not use the product for a lengthy
period of time.
• Keep the instrument in a dry place.
6.1 Battery replacement
• Replace the batteries when the alarm tone declines.
12
04.06.2021 14:18 Uhr Seite 7
Alarm clock
7. Troubleshooting
Problems Solutions
➜ Ensure that the battery polarity is
Clock's hands do not move
➜ Change the batteries
➜ Change the batteries
Incorrect indication
If your device fails to work despite these measures contact the sup-
plier from whom you purchased it.
8. Waste disposal
This product has been manufactured using high-grade materials and
components which can be recycled and reused.
Never dispose of empty batteries and rechargeable
batteries in household waste. As a consumer, you are
legally required to take them to your retail store or to
appropriate collection sites depending on national or
local regulations in order to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU
Waste Electrical and Electronic Equipment Directive
(WEEE).
Please do not dispose of this instrument in household
waste. The user is obligated to take end-of-life devices
to a designated collection point for the disposal of
electrical and electronic equipment, in order to ensure
environmentally-compatible disposal.
correct
13