Step 5 Mount your hard drives onto the removable drive tray and secure it with the screws included in
the accessory kit to avoid any damage to the hard drive due to accidental movements.
Step 6 When the hard drive installation has been completed, insert the hard drive tray into the system
horizontally and secure the latch into place.
Step 7 Connect the AC power cable to the DR5-WBS3, and then plug the AC power to the wall socket.
Boot-up the unit.
Step 8 Set the storage mode using the LCD and buttons on the front (please refer to section 5 for front
panel and LCD information).
Step 9 Connect the cable to the PC and the DR5-WBS3 port.
Step10 After booting up, your operating system will automatically recognize the RAID storage setup. After
RAID has been successfully recognized, please format your disks as instructed by your operating
system to suit your own storage needs. After formatting is complete, you may begin to use your
DR5 system.
5. Description of Front Panel Operation and LCD Information
Level 0
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
EXTERNAL 5 BAY
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
HARDWARE RAID
Level 1
Create One RAID
Quick Setup
Quick Setup
Delete All RAID
Delete All RAID
Delete All RAID
Identify Disk
Identify Disk
Identify Disk
Identify Disk
Identify Disk
Disk Manager
Disk Manager
Disk Manager
Disk Manager
Disk Manager
Disk Manager
Show Disk Info
Identify RAID
Create RAID
Delete RAID
RAID Manager
RAID Manager
RAID Manager
RAID Manager
RAID Manager
RAID Manager
RAID Manager
RAID Info
Change RAID Pwd
Rebuilding Priority
Standby Timer
System Info
Change Password
Logout From Menu
System Manager
System Manager
System Manager
System Manager
System Manager
System Manager
System Manager
Alarm Control
Hardware Monitor
Hardware Monitor
Hardware Monitor
Level 2
Level 3
RAID 0 / Clone / Large / RAID 1 / RAID 5 / RAID 3 / RAID 10
RAID 0 / Clone / Large / RAID 1 / RAID 5 / RAID 3 / RAID 10
Disk 1
Disk 2
Disk 3
Disk 4
Disk 5
< Disk Info >
< Disk Info >
Select RAID
Select RAID
RAID 0 / Clone / Large / RAID 1 / RAID 5 / RAID 3 / RAID 10
RAID 0 / Clone / Large / RAID 1 / RAID 5 / RAID 3 / RAID 10
Select RAID
Select RAID
< Password >
< Password >
Highest/High/Medium/Low/Lowest
Highest/High/Medium/Low/Lowest
< 99999min >
< 99999min >
Firmware Version
Firmware Version
< Password >
< Password >
< Y or N >
< Y or N >
Mute the Buzzer
Mute the Buzzer
Voltage Monitor
Temp. Monitor
FAN Monitor
6
SOHORAID DR5 User Manual
Check Disk LED
Check Disk LED
Check Disk LED
Check Disk LED
Check Disk LED
for RAID setup
for RAID setup
for System Info
for System Info
< 3.3V / 5V / 12V >
< Temp. >
<Fan Speed/Fan Level>
Level 4